1. 3com Switch Commands

Using HyperTerminal with 3Com Superstack 3300. These instructions will help you find out (set up) IP configuration of theswitch managed through the console port.

3Com say Every time you want to access the Web interface, use the Serial Web Utility to set up the connection to the Web interface; it launches your Web browser and accesses the Web interface for. 3Com SuperStack Switch needs SLIP driver to access via the web browser. I connect my 3COM 4200-28 port switch for configure through ethernet,at that time wrongly i enter the switch MAC address in the switch bridge database folder.At that time i loss the communication.

If you do not know the IP address of theswitch, you usually cannot do the administration through your internet browser.Typical solution is to follow the manual and try the default settings, reset the settingsor connect the switch through console port. HyperTerminal - is a program designed for communicationbetween computers or devices through serial port, modem or network connectionusing TCP/IP (Winsock).

HyperTerminal is used forcreating telephone connections, modem testing, file transfers,device configurations. At the outset of internet, this program was used for connection to theBBS services, but was later replaced by www. HyperTerminal is included in all Windows versions from95 to XP. You will not find it in the Vista Beta version and it will not be a part of the final version either.The program is originally not a product of Microsoft, but Hilgraeve. Those who are missing somefeatures, visit the website. You can downloadHyperACCESS or HyperTerminal PE and use them in Vista as a replacement of HyperTerminal.

3com Switch Commands

In Windows 2003, X64 the program must be installed first -Control Panel - Add or Remove Programs - Add/Remove WindowsComponents - Accessories and Utilities - Utilities - Communications -HyperTerminal. To connect, use Null-Modem Cable which connects Consoleport on switch and serial port (COM) in the computer. If using the connection to 3Com switch through PortConsole, no other devices should be connected through the frontRJ45 connectors.InstructionsLaunch the program. (Start - Programs -Accessories - Communication - HyperTerminal or typehypertrm in the command line)When you start the program for the first time, a location window may be displayed.Country code is obligatory. For our purpose, enter any numberand confirm with OK in the following window.Connection Description - Enter a name and choose an icon for the connection.Advanced connection settings. In our example, we focus only onconnections through serial ports.

Our cable is connected through COM1.